Biến tần Danfoss VLT® HVAC Drive FC 102 - Kỹ Nghệ Việt
Tiếng Việt English

Dịch Vụ

Thương hiệu

Chi tiết sản phẩm

Biến tần Danfoss VLT® HVAC Drive FC 102

Mô tả
Biến Tần Danfoss VLT® HVAC Drive FC 102 : Ứng dụng trong điều hòa không khí HVAC sử dụng cho: bơm, quạt, tháp giải nhiệt, máy nén, máy thổi khí, hệ chiller... công suất lên đến 1400Kw. Thiết kế nhỏ gọn tiết kiệm Panel tủ điện, với cấp bảo vệ IP21/ IP55 có thể đặt ngoài trời, tương thích các chuẩn truyền thông, kết nối SCADA, BMS, máy tính.. để điều khiển giám sát toàn bộ hệ thống.

Biến tần Danfoss VLT® HVAC Drive FC 102 manual

http://files.danfoss.com/documents/PE/doc_MG11A602.pdf

 

Features and benefits:

Range 
200-240 V.....1.1 kW - 45 kW
380-480 V.....1.1 kW - 1000kW
525-600 V.....1.1 kW - 90 kW
525-690 V.....11 kW - 1,4 MW

Enclosures
IP20/chassis, IP21/NEMA 1, IP55/NEMA 12 and IP66/NEMA 4X

Dedicated HVAC features Auto tuning of the PI controllers
With auto tuning of the PI controllers, the drive monitors how the system reacts on corrections made by the drive - and learns from it, so that precise and stable operation is achieved quickly. 

Automatic Energy Optimization
The standard feature AEO provides optimized motor magnetization at all speeds and loads. This increases energy efficiency by 5-15% for partial loads. 

Energy monitoring
The VLT® HVAC Drive provides a complete range of energy consumption information, which helps identify low-efficiency components in the HVAC system. 

PM motor support 
Support for any non salient permanent magnet motor up to 22 kW for better system efficiency. For more information, please see our brochure “EC+ is the smart trend in HVAC Drive Technology” above. 

Automated Resonance Monitoring
The drive can easily be set to avoid frequency bands at which connected fans create resonances in the ventilation system. This reduces installation time and system wear. 

Fan Belt Monitoring
From the relation between current and speed, the VLT® HVAC Drive is able to reliably recognize a broken belt. 

Fire Override Mode
In Fire Override Mode, the VLT® HVAC Drive will not react to control signals, warnings or alarms. It will continue reliable operation as long as possible and run until it is eventually destroyed itself to ensure that fire escapes remain free of smoke

Set point in temperature 
The VLT® HVAC Drive calculates the actual room temperature from the pressure in the cooling media and refines compressor operation accordingly without the need for additional software, sensors or controllers. This feature allows less expensive pressure sensors to be used.

Sản phẩm cùng loại

Cảm biến áp suất
Cảm biến áp suất Danfoss được dùng trong các hệ thống tự động hóa công nghiệp. Độ chính xác cao, ổn định, tuổi thọ cao trong môi trường khắc nghiệt nhất.
Van Solenoid
Van solenoid của Danfoss và cuộn hút bằng điện thường được cung cấp riêng biệt và sau đó kết hợp. Chúng được lắp ráp nhanh chóng và đơn giản mà không cần dụng cụ, tối ưu hóa sự linh hoạt của sản phẩm. Nếu một cuộn dây cần phải được thay thế, nó có thể được thực hiện mà không cần dừng hoặc tháo dỡ hệ thống.Các van điện từ cũng có sẵn như các đơn vị lắp ráp nếu cần.